Product Infosheet
★ New!
by Lyson
Introducing
RAPID Hives
from Lyson
Rapid
Assembly
Polystyrene
Interlocking
Design
10-Frame Polystyrene Langstroth Hives — built for superior insulation, tool-free assembly, and long-lasting performance in the apiary.
Available Configurations
RAPID 10-Frame Hive System
1
RAPIDLOWROOF
Component — Roof
Low Roof
SKU: RAPIDLOWROOF
Material
Polypropylene
R-Value
5.4
Dimensions (L × W × H)
21-3/8" × 17-7/8" × 1-15/16"
Finish
Unpainted
Inner Cover
Not required
Low-profile roof — no inner cover required
Polypropylene construction resists moisture, warping, and UV degradation
Compatible with the Polystyrene Top Feeder (RAPIDDEEPFEED)
Reduces parts count and simplifies hive management
2
RAPIDROOF
Component — Roof
High Roof
SKU: RAPIDROOF
Material
Polypropylene
R-Value
4.6
Dimensions (L × W × H)
23-1/4" × 17-7/8" × 5-1/8"
Finish
Unpainted
Plugs Included
8 (4 solid & 4 ventilated)
Ventilation options provided via interchangeable solid and ventilated plugs
Compatible with the Plastic Top Feeder (RAPIDFEED)
Higher profile accommodates feeders placed under the roof
Polypropylene construction for long-term outdoor durability
3
RAPIDDEEPFEED
Optional Add-On
Polystyrene Top Feeder
SKU: RAPIDDEEPFEED
✨ Compatible with Low Roof (RAPIDLOWROOF) only
Total Capacity
2.3 gal (9L)
Per Section
7.75 qt (4.5L)
Dimensions (L × W × H)
21-1/2" × 17-15/16" × 5-1/8"
R-Value
6.1
Finish
Unpainted
Metal mesh bee ladders in each section dramatically reduce bee drowning
Center divider allows simultaneous feeding on both sides
Insulated EPS walls (R-Value 6.1) protect syrup from chilling
Easy to clean — smooth interior surfaces, simple disassembly
4
RAPIDDEEP
Component — Brood Box
Deep Hive Body
SKU: RAPIDDEEP
Frame Capacity
10 Langstroth Deep Frames
R-Value
6.1
Dimensions (L × W × H)
21-7/16" × 17-15/16" × 9-11/16"
Wall Thickness
1-9/16"
Finish
Unpainted
Dovetail corner joints — tool-free assembly, no hardware required
Molded-in hard plastic reinforcements at stress points for long-term durability
EPS walls deliver outstanding thermal insulation year-round
Interlocking top and bottom edges align stacked boxes and resist hive tool pry damage
5
RAPIDMED
Component — Honey Super
Medium Super
SKU: RAPIDMED
Frame Capacity
10 Langstroth Medium Frames
R-Value
6.1
Dimensions (L × W × H)
21-7/16" × 17-15/16" × 6-13/16"
Wall Thickness
1-9/16"
Finish
Unpainted
Same EPS wall construction as the deep body — R-Value 6.1 throughout
Designed for honey supers — medium depth reduces lift weight at extraction
Dovetail joints and interlocking edges match all other RAPID hive components
Molded-in plastic reinforcements at corners and stress points
6
RAPIDBOT
Component — Base
Vented Bottom Board
SKU: RAPIDBOT
Overall Dimensions (L × W × H)
23-1/4" × 18-5/16" × 3-7/8"
Pull-Out Varroa Tray
17-3/8" × 12-5/8" × 5/16" thick
Removable Varroa monitoring tray — pull-out design with grid lines for mite counting
Entrance reducer with adjustable closure and integrated mouseguard
Textured landing board surface helps bees gain footing on approach
Forward-sloped floor channels water away from the colony for improved drainage
7
RAPIDFEED
Optional Add-On
Plastic Top Feeder
SKU: RAPIDFEED
✨ Compatible with High Roof (RAPIDROOF) only
Total Capacity
2 gal (7.5L)
Hole Diameter
2-1/4"
Dimensions (L × W × H)
19-11/16" × 16" × 3-3/8"
Bee Access Points
5 (1 center cup + 4 corners)
Material
Polypropylene
5 access points for bees — textured center cup and four corner access points
Sits under the High Roof — bees access from below without exposing syrup
Large 2-gallon capacity reduces refilling frequency during heavy feeding periods
Smooth plastic surfaces are easy to clean between uses